BBGCC - 33-084 POLYLITE POLYESTER RESIN
- MSDS: BBGCC
- Manufacturer: REICHHOLD CHEMICALS INC
- Product Name: 33-084 POLYLITE POLYESTER RESIN
- National Stock Number: 6850-00F000193
Product Identification
Product ID:33-084 POLYLITE POLYESTER RESIN
MSDS Date:08/01/1989
FSC:6850
NIIN:00F000193
MSDS Number: BBGCC
Responsible Party
DURHAM, NC 27713
US
Emergency Phone: 919-544-9225
Info Phone: 919-544-9225
Cage: DO591
Contractor
Telephone: 800-275-6353
Cage: DO591
Ingredients
STYRENE, MONOMER (SARA III)
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: 10-20%
OSHA PEL 100 PPM
ACGIH TLV: S,50PPM/100STEL;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN & EYES: IRRITATION. INHALATION:
MUCOUS MEMBRANE IRRITATION, UPPER RESPIRATORY TRACT DISCOMFORT.
INGESTION: GASTROINTESTINAL DISTURBANCES, DISCOMFORT, PAIN.
ABSORPTION & ASPIRATION HAZARD. HIGH CO NCENTRATIONS MAY CAUSE
LIVER & KIDNEY DAMAGE.
Explanation of Carcinogenicity:IARC HAS CLASSIFIED STYRENE AS A
POSSIBLE HUMAN CARCINOGEN (GROUP 2B).
Effects of Overexposure:SKIN: DEFATTING, DRYNESS, DERMATITIS. EYES:
TEARS. INHALATION: HEADACHE, NAUSEA, INSENSIBILITY, CNS EFFECTS.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS.
INHALATION: REMOVE TO FRESH AIR. IF UNCONSCIOUS, GIVE OXYGEN OR
CPR. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN
ALL CASES .
Fire Fighting
Flash Point:89F
Lower Limits:1.1%
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL, CO2, CLASS B
EXTINGUISHING AGENT
Fire Fighting Procedures:FIREFIGHTERS & OTHERS EXPOSED TO VAPORS OR
PRODUCTS OF COMBUSTION SHOULD WEAR SELF-CONTIANED BREATHING
APPARATUS. FLAMMABLE LIQUID.
Unusual Fire/Explosion Hazard:IF POLYMERIZATION TAKES PLACE IN A CLOSED
CONTAINER, THERE IS THE POSSIBILITY OF VIOLENT RUPTURE OF THE
CONTAINER. PRODUCT VAPORS MAY FORM AN EXPLOSIVE MIXTURE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. ABSORB SPILL W/AN ABSORBENT MATERIAL SUCH AS SAWDUST,
VERMICULITE OR SAND & PLACE IN A CLOSED CONTAINER. IF LARGE SPILL,
DIKE THE AREA TO PREVENT THIS M ATERIAL FORM ENTERING WATER SYSTEMS
OR SEWERS.
Handling
Handling and Storage Precautions:AVOID STORAGE >100F. AVIOD
SKIN/INHALATION. AVOID IMPROPER ADDITION OF PROMOTER/CATALYST.
PRODUCT SHOULD BE STORED <80F TO AVOID SPOILAGE.
Other Precautions:ALTHOUGH ELEVATED TEMPERATURES DO NOT CONSTITUTE A
HAZARD, A PROMOTER & CATALYST USED W/THIS PRODUCT SHOULD ALWASY BE
MIXED SEPARATELY W/THE PRODUCT & MUST NEVER BE MIXED TOGETHER.
Exposure Controls
Respiratory Protection:A CANISTER-TYPE RESPIRATOR MUST BE WORN TO
PREVENT THE INHALATION OF VAPORS OR SPRAY MISTS WHEN >TLV/PEL.
Ventilation:LOCAL EXHAUST/MECHANICAL: REQUIRED
Protective Gloves:IMPERVIOUS
Eye Protection:FACE SHIELD, CHEMICAL GOGGLES
Other Protective Equipment:CLEAN PROTECTIVE CLOTHING TO PREVENT SKIN
CONTACT. EYE WASH STATION, SAFETY SHOWER
Supplemental Safety and Health
DISPOSE I/A/W LOCAL, STATE & FEDERAL REGULATIONS. UN 1866.
Chemical Properties
Boiling Pt:B.P. Text:295F
Vapor Density:>1
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN N-BU AC
Solubility in Water:INSOLUBLE
Appearance and Odor:PURPLE OPAQUE LIQUID W/PUNGENT ODOR.
Percent Volatiles by Volume:30-40
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS
Stability Condition to Avoid:TEMPS >100F, HEAT, DIRECT SUNLIGHT & OTHER
IGNITION SOURCES.
Hazardous Decomposition Products:EMISSION OF IRRITATING, ACRID FUMES
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES, FIRE
Disposal
Waste Disposal Methods:DISPOSAL OF THIS MATERIAL & ITS CONTAINER
REQUIRED COMPLIANCE W/APPLICABLE LABELING, PACKAGING, & RECORD
KEEPING STANDARDS. EXTREME CARE SHOULD BE TAKEN TO ENSURE THAT IT
IS DISPOSED OF ONLY IN A FACI LITY PERMITED FOR DISPOSAL OF
HAZARDOUSWASTES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.